Use mendelson for both HTTP and HTTPS

Hi all,

I use Mandelson with partners and at the moment we configured our local station with HTTP address.
Now, some partners are asking to exchange data with HTTPS, but I don't know how to tell on the partners configuration to use HTTPS- I tried creating another local station with HTTPS address, but If I do a send file manually I can tell the program to use a different local station, but the same thing it's not present on the partner tabs. So at this point I have the doubt that we can only use one local station, and consequently or HTTP OR HTTPS.
Am I right?

Forum
AS2

Comments

Profile picture for user service

tony.campione,

as sender you can setup the partner receipt URL to use the protocol HTTPS, as receiver you can bind TLS to a port in the configuration of the embedded HTTP server. You could bind a HTTPS port and a HTTP port, the you could have TLS and raw traffic.

Regards

Profile picture for user albertom

There are examples here in the forum, just search some old messages. Be aware that the xml file you are going to modify is now changed a bit, so you have to understand what you are doing and operate properly.